• <tbody id="dwcub"><div id="dwcub"></div></tbody>
    <bdo id="dwcub"><dfn id="dwcub"><thead id="dwcub"></thead></dfn></bdo>
      <menuitem id="dwcub"><dfn id="dwcub"></dfn></menuitem>
      <progress id="dwcub"></progress>
      <nobr id="dwcub"><optgroup id="dwcub"></optgroup></nobr>

      1. C.P: Mr. Wu
        F T: 0512-66956915
        FDM: 0512-66930668-9602
        FAX: 0512-66930698-9602
        EMAIL: wuxiaomin@szyongjie-motor.com

        Efficiency standards for motors in Australia and New Zealand

        Author: Comefrom: Date:2017-4-15 11:16:38 Hits:45

        Electricity efficiency standards for motors in Australia and New Zealand:

        The Australian government has implemented the Mandatory Renewable Energy Performance Standard (MEAT) program for household appliances and industrial equipment since 1999, and is managed by the Australian Government's Greenhouse Gas Office in conjunction with the Australian Standards Committee, in order to conserve energy and protect the environment. According to statistics, the Australian motor uses 30% of the national electricity consumption in Australia, corresponding to 11% of the temperature of the gas emissions. Taking into account the market mechanism is difficult to spontaneously promote the application of such energy-saving products, so the government decided to intervene.

        Australia's motor mandatory standards in October 2001 approved the entry into force, the standard number AS / NZS1359.5 [9]. New Zealand also implements this standard. The standard power range of 0.73 ~ 185kW, with 2,4,6,8 pole. The motors that need to be produced and imported in Australia and New Zealand are required to meet or exceed the minimum efficiency targets set forth in this standard. The standard can be tested in two test methods, thus setting two sets of indicators, one for the method A (AS / NZS 1359.102.3) indicators, corresponding to the US IEEE112-B method; another set for the method B (AS / NZS 1359.102.1), corresponding to IEC34-2, whose index values are essentially the same as eff2 of EU EU-CEMEP. In addition to the mandatory minimum standards, the standard also provides high efficiency motor indicators, recommended standards, and encourage users to adopt. Its value and the EU EU-CEMEP eff1 and the United States similar to the EPACT.

        In recent years, according to the environmental protection policy, Australia began in 2001 to implement the motor MEPS plan was considered. In the international implementation of the minimum energy efficiency standards for motor vehicles were analyzed, the United States and Canada and other North American countries to take mandatory measures to implement the minimum energy efficiency standards, and achieved good results. The EU adopted a voluntary energy efficiency standards, high efficiency motor implementation slow, which is due to this type of energy-saving products market mechanism there is a big flaw, unable to complete the market from the general efficiency of the motor to the efficiency of the motor changes. It is correct to believe that the mandatory measures for motorization in Australia since 2001 are correct, but the level of efficiency at that time should be improved. The United States and Canada are 60Hz, Australia, New Zealand is 50Hz, and Australia, New Zealand, a considerable part of the trading partners are 50Hz countries and regions, these countries (including the United States and Canada, the United States and Canada, the United States and Canada to adopt a mandatory standard, Most of the IEC and EU standards, and EU-CEMEP effl indicators and the United States EPACT indicators are the same level, so to determine the EU-CEMEP effl as the basis for the next stage of the mandatory motor energy efficiency standards. The implementation time is scheduled for 2006 to allow manufacturers, importers and users to have a preparation period

        ICP: 蘇ICP備14038574號-1 Technical support:RBWL

        欧美色视频日本片免费_欧美另类图区清纯亚洲_欧美人与动牲交a欧美-性女xx俄罗斯 堆龙德庆县| 乌审旗| 华亭县| 蒲江县| 漯河市| x2k